Learn About Kerosene Lamp Parts And Where To Buy Them




Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

Do you have a kerosene lamp that you love? Are you looking for ways to make it work better and last longer? In this blog post, we’ll teach you about kerosene lamp parts or oil lamp parts and where to buy them. We’ll also share some tips on how to keep your lamp in good condition. Read on to learn more!

Kerosene Lamp Parts; Oil Lamp Parts Wholesale

Table of Contents

What Are The Different Parts Of A Kerosene Lamp And What Do They Do ?

The parts of a kerosene lamp burner are the wick, the fuel reservoir, the flame regulator, and the chimney. The wick draws kerosene up from the fuel reservoir and delivers it to the flame. The flame regulator controls the size of the flame, and the chimney helps to direct the heat and light upward. You could think of the chimney as the shades part of the lamp.


The lamp collar is small and is an element of the kerosene puzzle. The lamp collar is attached to the oil on kerosene lamps. The threads permit the burner to be glued to the lamps. Quality lamp collars are fabricated from brass with a meticulous finish. Collars can be purchased in varying sizes. A large collar is typical of a lamp with a draught burner. The miniature collar fits lamps that feature cloves and spruce burners in them. The burner is placed in the collar. Depending on your installation process you should check the burner fits.


Lamp wicks are an important component of all Kerosene generator systems. Wicks can withstand pressure from combustion and transport vapor to a kerosene stove. Without an accurate wick, your burners and oil lamps can only reach a very low level of power. Wicks have a natural absorption that is strong between the non-absorbent fibres. Generally, wicking fabrics are braided. Wicks of round design typically have cleaner burns, but wicks of flat design are larger and produce more light.

Fuel Reservoir

A kerosene oil lamp fuel reservoir is a round, metal container that holds kerosene oil and sits atop the lamp. The reservoir has a small wick protruding from the center of its base, which extends down into the kerosene oil. When the wick is lit, heat from the flame vaporizes the kerosene oil in the reservoir, which then travels up the wick and is drawn into the flame, where it burns.

Fuel Regulator

A kerosene oil lamp fuel regulator is a device that regulates the flow of fuel to the wick of a kerosene oil lamp. The purpose of the fuel regulator is to maintain a consistent flame size and prevent the wick from burning too quickly.

There are two types of kerosene oil lamp fuel regulators: adjustable and non-adjustable. Adjustable fuel regulators allow the user to control the size of the flame, while non-adjustable fuel regulators only allow for a limited amount of control.

The most common type of kerosene oil lamp fuel regulator is the adjustable screw type. This type of regulator has a knob that can be turned to adjust the size of the flame.

Kerosene oil lamp fuel regulators are an important part of kerosene oil lamps and are necessary for safe and effective use.


Kerosene oil lamps are very prone to cracks and require frequent replacement. The correct chimney height for a kerosene lamp may be primarily an aesthetic issue. Glass chimney shades can be of varied thicknesses and are built to the specific requirements. The higher altitude lamps may require a higher chimney shade to achieve efficient combustion. Glass chimney can pull enough oxygen into a flame by opening under the chambers.

How To Choose The Right Parts For Your Kerosene Lamp

When choosing parts and accessories for your antique lamp it is important to select the right wick, as well as the appropriate fuel. You should also consider what size and style of lamp you want.

The wick is one of the most important parts of a kerosene lamp. It is responsible for drawing the fuel up from the reservoir and into the flame. The wick should be made of a material that is heat resistant and will not break down easily.

The fuel you use in your kerosene lamp is also important. You should only use kerosene that is specifically designed for lamps. Using other fuels can be dangerous and may damage your lamp.

When deciding on the size and style of your kerosene lamp, it is important to consider how you will be using it. If you plan on using the lamp for decoration, then a smaller, more delicate lamp may be perfect. However, if you need a lamp that is functional and will be used often, then a larger, sturdier lamp is a better choice.

Where Can You Buy Oil Lamp Parts ? Where Can You Buy Parts For Kerosene Lamps ?

Oil lamp parts and kerosene lamp accessories, such as floor lamp rotary switch replacement, are easily available these days. You can purchase them from most home improvement stores or online retailers that sell a great selection of lighting fixtures and supplies. If you’re looking for oil lamp parts wholesale, there are a few online vendors that sell them in bulk. For kerosene lamp parts, you may need to search a bit harder since they’re not as common as oil lamps. However, you should be able to find what you need with a little effort. In conclusion, finding oil lamp parts and kerosene lamp parts is relatively easy and there are many reputable sources where you can buy them.

Here is a list of 4 hardware stores where you can to buy kerosene lamp parts:

1. Walmart

2. Ace Hardware

3. True Value Hardware

4. Do it Best

Here is a list of 5 online website retailers where you can buy kerosene lamp parts:

  1. Amazon.com
  2. Ebay.com
  3. John Moncrieff
  4. Old Flames
  5. The Classic Lamp Company

Here is a list of wholesalers where you can buy kerosene lamp parts:

1. Alibaba

2. AliExpress

3. Banggood

4. Dhgate

5. Wish

How To Install New Parts On Your Kerosene Lamp

Kerosene lamps are a great way to provide light in your home without electricity. They are also very easy to install new parts or accessories on, so if something goes wrong you can easily fix it. Here is a guide on how to install new parts on your kerosene lamp to make it work correctly.

Four Easy Steps to Install New Parts On Your Kerosene Lamp:

1. First, you will need to purchase the new part that you need. Make sure to get the correct size and type of part for your lamp.

2. Next, you will need to remove the old part from the lamp. To do this, unscrew the nut or screws that are holding it in place.

3. Once the old part is removed, you can now install the new one. Simply screw it in place, making sure it is tight.

4. Finally, replace the globe or shade on the lamp and you are finished.

That’s all there is to it! Installing new parts on your kerosene lamp is a very easy process that anyone can do.

5 Top Tips For Maintaining Your Kerosene Lamp

Kerosene lamps are a great way to provide light in an emergency situation, but they need to be properly maintained in order to function properly. Here are some tips for maintaining your kerosene lamp:

1. Make sure the wick is trimmed to the proper length. If the wick is too long, it will smolder and produce smoke. If the wick is too short, it will not provide enough light.

2. Keep the lamp clean. Dirt and soot can build up on the glass and chimney shades, reducing the amount of light that is produced.

3. Use fresh kerosene. Old or dirty kerosene can cause the wick to burn unevenly and produce smoke.

4. Be careful not to overfill the lamp. Kerosene expands as it heats, so if you fill the lamp too full, it can spill when you light it.

5. Don’t move the lamp while it is lit. The flame can be extinguished easily, and you could accidentally spill hot kerosene.

By following these tips, you can ensure that your kerosene lamp will provide reliable light when you need it.


Conclusion paragraph: If you’re looking to restore your old kerosene lamp, or want to buy a new one, we hope this blog post has helped. We’ve shown you how to choose the right parts and where to find them, as well as how to install and maintain them. So what are you waiting for? Get shopping!

Frequently Asked Questions

What Are The Parts Of An Oil Lamp Called ?

An oil lamp is a simple device that consists of four main parts: the base, the bowl, the wick, and the chimney. The oil lamp base is usually made from metal or ceramic and provides stability for the rest of the lamp. The oil lamp bowl is typically made from glass or metal and holds the oil that will be burned. The wick of an oil lamp is made from cotton or another absorbent material, and it helps to draw the oil up into the flame. The chimney of an oil lamp helps protect the flame from drafts and regulates the amount of oxygen available to the fire. By understanding the different parts of an oil lamp, you can ensure that your lamp burns safely and efficiently.

Are Old Kerosene Lamps Worth Anything ? Are Oil Antique Lamp Worth Money ?

Old kerosene lamps can be found at oil lamp parts wholesale suppliers and are also available online. There are four main types of old kerosene lamps: Miniature oil lamps, Oil lanterns, Hanging oil lamps, and Table oil lamps. The value of an old kerosene lamp depends on its type, age, and condition. 

Miniature oil lamps are the most valuable, followed by oil lanterns. Hanging oil lamps and table oil lamps are the least valuable. The age of the lamp also impacts its value; older lamps are worth more than newer ones. The condition of the lamp is also a factor; a lamp in good condition will be worth more than one that is in poor condition.

Oil antique lamp are only worth money if they are antiques. They can date back as early as 70,000 years ago and are one of the oldest inventions. The lamp collar is the part of the lamp that supports the wick, and it can be made of bronze, brass, or glass. The most expensive lamp collars are made of gold or silver. Oil lamps were used for thousands of years before electric lighting was invented. In fact, they were used all the way up until the 1950s in some parts of the world. Today, oil lamps are mostly used for decoration or as a backup lighting source. They can range in price from $20 to $5,000, depending on their age, condition, and materials.

What Is The Top Part Of An Oil Lamp Called ?

A lamp collar is the top part of an oil lamp. It is a metal or glass ring that fits around the wick to hold it in place. The lamp collar also serves as a guard to prevent the flame from coming into contact with the oil reservoir. This helps to prevent the lamp from overheating and exploding. In addition, the lamp collar helps to direct the light from the flame upwards, providing more light than would be possible with a bare flame. As a result, the lamp collar plays an essential role in the function of an oil lamp.

How Do You Restore An Old Kerosene Lamp ?

Restoring an old kerosene lamp is not difficult, but there are a few steps involved. First, you need to remove the lamp collar and wick. Next, clean the lamp body and chimney with hot soapy water. Once the lamp is clean, replace the wick and lamp collar. Finally, fill the lamp with kerosene and allow it to soak for several hours before lighting.

Restoring an old kerosene lamp is a relatively simple process, but it does require some basic knowledge of lamps and a few tools and materials. However, the end result is a beautiful and functional lamp that can provide light for many years to come.

What Is The Glass On An Oil Lamp Called ?

The glass on an oil lamp is called a lamp collar. It is placed around the wick to help protect it from drafts and to help keep the flame burning evenly. The lamp collar also helps to reflect light, which makes the lamp appear brighter. lamp collars are usually made of clear glass, but they can also be found in other colors, such as amber or blue. lamp collars come in various sizes, depending on the size of the lamp. They can be found at most hardware stores or online.

About the author

Leave a Reply

Your email address will not be published. Required fields are marked *

Latest posts

  • Hurricane Lamps: A Guide to Choosing the Perfect One

    Hurricane Lamps: A Guide to Choosing the Perfect One

    Hurricane lamps are a beloved and timeless form of lighting, and this article will provide you with all the information you need to choose the perfect one for you. In this guide, we will review several hurricane lamps and highlight their features and benefits to help you make an informed decision. The ideal hurricane lamp…

    Read more

  • Outdoor Chandeliers for Gazebos: Tips and Recommendations

    Outdoor Chandeliers for Gazebos: Tips and Recommendations

    This post is intended to provide readers with helpful tips and recommendations on the best outdoor chandeliers to use for their gazebo. It will provide guidance on what to look for in a chandelier, as well as recommendations on some of the top-rated chandeliers for gazebos. By the end of the post, readers should have…

    Read more